Top Tips for Working in Your Biological Safety Cabinet

Written by ATSC230@545404 on . Posted in WordPress

Stop Problems from Happening

Person in Hazmat Suit Working in LaboratoryEven after the biosafety cabinet testing results have come back positive, you probably want to take a few extra precautions. Biological safety cabinet testing doesn't need to be difficult as long as you follow the proper safety rules. Whether you're just trying to keep everything from going wrong or stop sample contamination from occurring, read the following to prevent issues from happening inside your biological safety cabinets.

Note Airflow

Airflow is something that you shouldn't neglect. Regardless of obtaining biosafety cabinet certification, you still need to watch the airflow within your biosafety cabinet. The air itself must be filtered. Otherwise, you could find yourself letting in contaminants. No matter what kind of biosafety cabinet classification you work with, you should not allow any contaminants to come inside or leak outside. When in doubt with the kind of air you're dealing with, check the room, work surface, and the cabinet itself.

Open Air Grill

While conducting biological safety cabinet testing, do not accidentally block any air grills. By covering the air grill, you might inadvertently compromise the integrity of your airflow. Think of it this way; if you want to avoid sending air from either your laboratory or work area to somewhere else, never compromise the integrity of the air grill. Leave the air grill alone to prevent air from going into the wrong areas.

Go Slow

Working with a biosafety cabinet might require some extra self-control or patience. As a general rule, you shouldn't make any fast movements. Put your arms in slowly and remove them slowly. Always err on the side of caution and move slowly while working with any biological safety cabinet. The major concern is that you accidentally disrupt the airflow, which can result in an unexpected issue. The cabinet's air barrier can be affected by rapid motions.

Safe Sash Level

In order to maintain proper airflow, you need to watch the sash level. An improper sash level can result in airflow problems while you're working. So, pay attention to the certifier. That should tell you if your cabinet is functioning well or not. It can also inform you how the airflow is doing. Airflow is one of those things that you must be aware of while you're working with any kind of biological safety cabinet.

The Right Attire

Your attire not only affects your safety, but it also affects two other things. This includes both the environment that you're working in and the product that you're working with. You can wear your everyday clothing, but you should have something over it. You should get used to wearing a lab coat. That being said, a lab coat probably won't cover your hands, so protect your fingers and palms with nitrile gloves.

Person Putting on Latex GlovesNo Splattering

One of the last things that you probably want to happen is to have an accidental contamination while working with important materials. Make sure that you don't try to splatter anything. To be careful, try to maintain a good distance between clean materials and anything that might cause cross-contamination. Nebulized spores are not your friend. You need to make sure that you keep everything safe and take your time. Don't forget to be mindful of your own safety.